Kashin baya Tsarin Plate Plate na Gaba
1.Material: Titanium;
2. Nau'i:
Plate I: nau'in kullewa;
Plate II: Nau'in kulle kai.
3.Launi:
Farantin: Yawancin lokaci baki ko launin toka, amma ana iya daidaita su.
Screw: Yawancin lokaci rawaya ko shuɗi, amma ana iya keɓance su.
4.The surface jiyya: oxidized, yana da tsawon sabis rayuwa.
5.Za a iya lanƙwasa don daidaitawa daban-daban curvature na ɗan adam cervical kashin baya.
6.Za a iya amfani da shi tare da cages na mahaifa don tiyata.
7.A kayan aiki sets ga biyu jerin ne daban-daban.Amma tare da ƙarin kayan aiki guda uku, saitin zai iya dacewa da nau'ikan biyu.
Iri biyu:
Akwai nau'i biyu na tsarin mahaifa na gaba, kuma faranti da sukurori na kowane jeri sun dace.
Jerin I:
Farantin shine nau'in kullewa.Bayan an shigar da farantin karfe da screws na girman da suka dace, don gyara sukurori a cikin matsayi mai kyau, likitoci kawai suna buƙatar juya maɓallin kulle 90 °.
Jerin II:
Farantin nau'in kulle kai.Akwai ganyen bazara a gefen ramin kullewa.Da zarar an saka dunƙule cikin matsayi mai dacewa, ana iya kulle shi ta atomatik.
| Jerin | Sunan samfur | Ƙayyadaddun bayanai |
| Jerin I | Plate I | 4 Ramuka * 25mm / 27mm/ 30mm/ 32mm |
|
|
| 6 Ramuka * 35mm/ 38mm/ 41mm/ 44mm/ 47mm |
|
|
| 8 Ramuka * 50mm/ 53mm/ 57mm/ 60mm/ 63mm/ 66mm/ 69mm |
|
|
| 10 Ramuka * 72mm/ 75mm/ 78mm/ 81mm |
|
| Screw I | Φ4 * 13mm14mm/15mm/16mm |
|
|
| Φ4.5 * 13mm14mm/15mm/16mm |
| Series II | Plate II | 4 Ramuka * 22.5mm/ 25mm/ 27.5mm/ 30mm/ 32.5mm/ 35mm |
|
|
| 6 Ramuka * 37.5mm/ 40mm/ 43mm/ 46mm |
|
|
| 8 Ramuka * 51mm/56mm/ 61mm/ 66mm/ 71mm/76mm/81mm |
|
| Screw II | Φ4*11mm13mm/ 15mm/ 17mm/ 19mm |
